Durlon 8500 Aramid-Inorganic/NBR
Our workhorse material: excellent in steam, natural gas, soybean processing, and with new generation refrigerants.
Application
A high quality general service gasket material for a wide range of services in pulp and paper, food, beverage, pharmaceutical, chemical, refinery, gas pipeline, and general industry. Durlon 8500 has good compressibility and recovery, and excellent sealability, flexibility, and cutting characteristics.
Composition
High-strength aramid and inorganic fibres bonded with high-grade nitrile (NBR) rubber.
Fire testing
Durlon 8500 has passed the API 6FB fire test: average temperature above 650 °C for 30 minutes at 40 bar, with a maximum allowable leakage of 1 ml per inch per minute.
Anti-stick properties
All compressed Durlon gasket materials have passed the MIL-G-24696B Navy Adhesion Test (366 °F for 48 hours).
| Densityg/cc (lb/ft³) | 1.7 (106) |
|---|---|
| Compressibility, %ASTM F36 | 8–16 |
| Recovery, %ASTM F36 | 50 |
| Creep relaxation, %ASTM F38 | 20 |
| Tensile strength across grainASTM F152, MPa (psi) | 13.8 (2,000) |
| Fluid resistanceASTM F146: IRM 903 oil, 5 h at 149 °C; ASTM Fuel B, 5 h at 21 °C | To confirm: the source table's values are out of line |
| Sealability, ASTM F37 (Fuel A)ml/hr | 0.01 |
| Sealability, ASTM F37 (nitrogen)ml/hr | 0.4 |
| Sealability, ASTM F2378 (nitrogen)cc/min | 0.03 |
| Volume resistivityASTM D257, ohm-cm | 4.2 × 1013 |
| Dielectric breakdownASTM D149, kV/mm (V/mil) | 11.7 (297) |
| FlexibilityASTM F147 | 10x |
Approvals and tests
- FDAConforms to the requirements of 21 CFR 177.2600
- API 6FB fire testPassed
- MIL-G-24696B Navy Adhesion TestPassed, 366 °F for 48 hours
| Factor | 1/16 in | 1/8 in |
|---|---|---|
| m | 2.7 | 4.2 |
| Ypsi (MPa) | 2,359 (16.3) | 2,931 (20.2) |
| Gbpsi (MPa) | 650 (4.5) | 400 (2.8) |
| a | 0.330 | 0.350 |
| Gspsi (MPa) | 200 (1.4) | 20 (0.1) |
Need a different material for chemicals, oxygen, or higher temperatures? Compare all eight Durlon materials.
Request a quote
Add the thickness, sheet or cut gasket sizes, and quantities. Your request goes to our sales team.

