Durlon 8500 Aramid-Inorganic/NBR

Our workhorse material: excellent in steam, natural gas, soybean processing, and with new generation refrigerants.

General service gasket material. Sole distributor for Durlon Sealing Solutions in Trinidad and Tobago.

Application

A high quality general service gasket material for a wide range of services in pulp and paper, food, beverage, pharmaceutical, chemical, refinery, gas pipeline, and general industry. Durlon 8500 has good compressibility and recovery, and excellent sealability, flexibility, and cutting characteristics.

Composition

High-strength aramid and inorganic fibres bonded with high-grade nitrile (NBR) rubber.

Fire testing

Durlon 8500 has passed the API 6FB fire test: average temperature above 650 °C for 30 minutes at 40 bar, with a maximum allowable leakage of 1 ml per inch per minute.

Anti-stick properties

All compressed Durlon gasket materials have passed the MIL-G-24696B Navy Adhesion Test (366 °F for 48 hours).

Typical physical properties
Densityg/cc (lb/ft³)1.7 (106)
Compressibility, %ASTM F368–16
Recovery, %ASTM F3650
Creep relaxation, %ASTM F3820
Tensile strength across grainASTM F152, MPa (psi)13.8 (2,000)
Fluid resistanceASTM F146: IRM 903 oil, 5 h at 149 °C; ASTM Fuel B, 5 h at 21 °CTo confirm: the source table's values are out of line
Sealability, ASTM F37 (Fuel A)ml/hr0.01
Sealability, ASTM F37 (nitrogen)ml/hr0.4
Sealability, ASTM F2378 (nitrogen)cc/min0.03
Volume resistivityASTM D257, ohm-cm4.2 × 1013
Dielectric breakdownASTM D149, kV/mm (V/mil)11.7 (297)
FlexibilityASTM F14710x

Approvals and tests

  • FDAConforms to the requirements of 21 CFR 177.2600
  • API 6FB fire testPassed
  • MIL-G-24696B Navy Adhesion TestPassed, 366 °F for 48 hours
Gasket factors
Factor1/16 in1/8 in
m2.74.2
Ypsi (MPa)2,359 (16.3)2,931 (20.2)
Gbpsi (MPa)650 (4.5)400 (2.8)
a0.3300.350
Gspsi (MPa)200 (1.4)20 (0.1)

Need a different material for chemicals, oxygen, or higher temperatures? Compare all eight Durlon materials.

Request a quote

Add the thickness, sheet or cut gasket sizes, and quantities. Your request goes to our sales team.

Find your area's representative

Material

Privacy policy link: none published yet